Everyone says they want to wait until all the wrinkles are ironed out before they grab an M1 MacBook Pro. The thing is I've yet to run into one, and I see it can do impressive things like this and probably barely even get warm and lose only 10 percent battery in 1.5 hours. Thanks to M1 chip, I can run both the Android Emulator and the iOS Simulator at the same time and still it is super fluid. Everyone says they want to wait until all the wrinkles are ironed out before they grab an M1 MacBook Pro. The thing is I've yet to run into one, and I see it can do impressive things like this and probably barely even. 4# Andyroid Emulator. It is the trending Mac Android emulator which liked by the most. With open GL hardware support, this emulator is the one that is too easy to install. With the help of Andyroid Emulator, the phone can be turned into a remote control for gaming. With quick customer support, you will never find yourself deserted.
Setting up the environment
Setup for iOS needs:
- Node (with NVM)
- Watchman
brew install watchman
- Xcode (install from the App Store)
- Xcode Command Line Tools
xcode-select --install
- Accept the Software License for Xcode
sudo xcodebuild -license
. It'll prompt you anyway when you run Xcode for the first time. - CocoaPods
sudo gem install cocoapods
Homebrew
Install Homebrew if you don't have it installed already
Node LTS with NVM
iOS
- Open Terminal / iTerm with Rosetta (Get Info > Open using Rosetta)
- Prefix the CocoaPods related commands with
arch -x86_64
Android
- Install JDK 8
brew install --cask adoptopenjdk/openjdk/adoptopenjdk8
- Install Android Studio
- Install Android Emulator for M1
The Android Emulator doesn't work out of the box yet. Luckily, there is a Preview build by Google that supports Apple Silicon M1 chip based MacBooks. You'll have to download and install it separately. Most things work.
Troubleshooting
command not found
forbrew
ornvm
. Make sure you have a~/.zshrc
file. On a fresh new M1 MacBook, there is no~/.zshrc
or~/.zprofile
created and the$PATH
doesn't get updated because of it. Create a~/.zshrc
file and run the commands to install Homebrew and NVM again.
Add this to you Podfile
Two options:
- Run on a different port
react-native start --port=8088
- OR find out what program is using 8081
sudo lsof -i :8081
and kill itkill -9 1234
incorrect architecture 'x86_64' errors
add this to the Podfile
run pod install
afterwards
Links
Updated on: August 28, 2021
Note: This article was updated in August 2021. The Macbook Pro M1 I was using crashed and stopped working without any reason on August 25, 2021. In just seven months of use.
It took time to get it repaired. That forced me to buy another laptop. While setting up the new laptop, I thought it is an excellent time to update this post.
lol @apple started shipping used/damaged products to India by boxing them as NEW?
cc: @AppleSupportpic.twitter.com/hmgZwiS5Kl
I recently upgraded from Macbook Air 2017 to Macbook Pro with an M1 chip. My four-year-old Macbook Air was giving up. The performance to run heavy tasks like using the iOS simulator when developing and working on React Native apps was declining. I had long given up using the Android emulator and used an actual Android device for testing. December 2020 was the time I decided its time to upgrade.
I had a long internal discussion with myself for almost a month about whether I should upgrade to M1 or stick with Intel-based chips and spend them bucks. Don't get me wrong here, M1 is not cheap either as I did go for a RAM upgrade to max limits, which is currently 16GB in the base model.
After going through some online reviews and research, the kind of performance I was expecting has been worth it so far (it is fast, no doubt). I received it two weeks back when writing this post, and since then, I have installed all the necessary tools and utilities that help me work on Web development and React Native apps.
My local environment currently includes:
- Homebrew (now supported Apple Silicon machines since
2.6.0
) - Git
- Node.js
- npm
- Zsh
- Oh My Zsh
- iTerm
- Xcode
- yarn
- VSCode
- Rosetta 2
OS apps:
- Brave
- Android Studio
- Insomnia as REST API client
- Xcode
- Slack or Discord (for work and community)
- There (to track team mate's timezone)
- LICEcap (for gifs)
- Zoom (for work)
- GitHub Desktop App
- Cleanshot (for screenshots)
- Google Chrome
- set to default
- First things to do:
- Log in to: Gmail, Twitter, GitHub, Outlook
- Developer mode on
- Extensions:
- Grammarly
- Toby to organize tabs
- First things to do:
- set to default
System Settings:
- Disable Ask Siri
- Disable Spotlight search except Applications, Calculator, Definition, and System Preferences.
- Trackpad:
- Fix direction: Scroll & Zoom > Natural off
- Right click: Point & Click > Secondary Click
- Disable dictionary lookup: Point & Click > Look up & data detectors off
- More gestures > Swipe between pages off & App Exposé off
- Finder settings:
- Preferences > Advanced > Show filename extensions
- Enable show path bar: View > Show Path Bar
- Dock:
- Turn auto hiding on
Copy dotfiles
iTerm
My favorite terminal app that I have been using for years is iTerm. I am currently using two versions of iTerm on my setup. One with Rosetta 2 enabled and the default one. This way, I can only use the Rosetta 2 emulator when required. There are no performance issues I have found with using iTerm with Rosetta 2 for ARM-based applications.
If you'd like a similar setup, go to the Applications
folder in your Macbook and duplicate the iTerm
application.
You can rename the duplicated iTerm app. I have renamed it to iTerm_rosetta
to differentiate between the two. Right-click the duplicated app and click Get Info. In the General, check the box where it says Open using Rosetta.
Now, if you open the second terminal, it will be using Rosetta 2 emulator by default.
Other iTerm profile settings that I use:
Recently I started using Jetbrains Mono font.
For the overall looks and appearance, I use Dracula Pro Color Presets created by Zen Rocha.
And my last favorite thing is to split the working directory into two more different tabs using Command + D
for horizontal panes.
Make sure to have the following setting configured from
General > Working Directory > select Advanced Configuration > click button Edit... > select Reuse previous session's directory under Working Directory for New Split Panes.
For terminal prompt, I use Spaceship ZSH.
Homebrew
On December 1, 2020, the Homebrew team announced on their website about the version release 2.6.0
. The most significant changes among others they listed were the support for macOS Big Sur, using brew
commands instead of brew cask
and beginning to support macOS M1 and Apple Silicon or ARM-based chips.
Using the terminal, you can install the Homebrew by executing the default command:
brew installs:
- node/npm
- scrcpy (control Android devices connect via USB on mac)
- adoptopenjdk8 (required for React Native)
- Karabiner-Elements (remapping function keys)
- watchman (required for React Native)
What is Karabiner-Elements?
When I bought Macbook Air M1, it had function keys (that got me excited), but I don't understand why Apple decided to replace function keys that would allow me to control Keyboard Brightness?! And moreover, replace it with 'Do Not Disturb'.
Why? That got me confused 🤷
I found this tool called karabiner Elements that can be installed as a brew formula:
Here are the key mappings I am using now:
Git
I did install Git using brew command:
To authenticate GitHub to be used from the terminal environment, I'd recommend you to check out the official document on creating and accessing personal tokens.
Xcode
After installing Git, for me, the next step is to install Xcode app from Apple's App Store.
Then, install 'command line tools'. It is required by many of the formulae in Homebrew.
After installing it, make sure to open it for the first time, from the menu bar, open Xcode > Preferences > Locations and make sure that Command Line Tools point towards the current Xcode app.
ZSH and Oh My Zsh
ZSH is the default shell in macOS Big Sur. However, I like to use Oh My Zsh to manage the ZSH configuration, plugins, and a theme to prettify the terminal.
To install, run the command below:
After installation, make sure that the file .zshrc
is exporting the below path at the top:
The first I like to do after setting up the bare minimum ZSH configuration is to install a plugin called zsh-syntax-highlighting. It provides syntax highlighting for the ZSH shell. Execute the series below commands in the terminal window:
This is my final ZSH configuration in the file ~/.zshrc
file:
Macbook M1
After installing the syntax highlight plugin, it starts to recognize the commands:
VSCode
VSCode and VS Code Insiders are currently supported on ARM chips (as of March 13, 2021). Download the installer for Insiders edition from here and for VSCode here.
I am still using the same VSCode configuration from my previous setup:
Themes
I usually like to switch between a dark and a light theme.
- For the dark theme where I spent most of my time, I am was previously using morgan.codes-theme, but now I am using fairyFloss.
- Other themes I switch between:
- Quiet Light
- Other themes I switch between:
- For file icons, I love Material-Icon-Theme.
- For terminal prompt, I use Spaceship ZSH.
- Font: Jetbrains Mono font.
Extensions
I use VSCode editor for both writing code and writing blog posts. Thus, the list of extensions below is the combination of extensions that fulfills both of my purposes.
Android Emulator M1
Global NPM Packages I use
- gatsby-cli To build and test out my personal blog built with Gatsby.
- npm-check to check for outdated, incorrect, and unused dependencies.
- git-watch-log to watch a git repo and recent changes.
For React Native Development
- install node
- install Watchman to watch changes in the filesystem using the command:
brew install watchman
. - install following gems:
- install Java Development Kit using the command:
brew install --cask adoptopenjdk/openjdk/adoptopenjdk8
. - Currently, I am using Arctic Fox Canary that supports Apple's based machines for Android Studio.
- Then install Android SDK (I do not prefer AVD and use an actual device for testing)
- scrcpy to display and control Android devices connect via USB on Mac.
⚛️ For more instructions on how to set up a development environment for React Native, please follow the official documentation here.
Rosetta 2
Update: I am not using the Rosetta environment to install anything on the secondary machine since August 2021. That is the reason I've mentioned it at the end of the post.
Rosetta 2 is the lifeline that allows you to run apps designed for Intel-based chips that use x86
architecture on ARM-based chips (in this case M1). This solution is provided by Apple in the form of an emulator and doesn't come pre-installed. You have to install it manually. Fire up the Terminal application that comes pre-installed on the Big Sur and let your first command to execute be:
If you decide not to put the flag --agree-to-license
, you will be prompted by Apple's interactive install, and you will have to agree to their terms and license conditions to use it.
Conclusion
That’s the setup I now use for my JavaScript, Node.js, React and React Native. I think it's a good machine. Hopefully, M1 is just the beginning of a new era of powerful computers for daily work use 🤞
Macbook Pro M1 2021
🤔 The only thing left for me is to find a way to transfer all laptop swag/stickers from my Macbook Air 2017 to Pro. I miss having them on this one.
Android Studio Emulator Mac M1
isapplesiliconready.com is another helpful link I found to check what is compatible to work on Apple Silicon chips natively or using Rosetta or not optimized at all.